Hotbox Natural Gas Heater 2.5kw

Product Description

This Hotbox 2.5kw Natural Gas Heater is a convector heater, meaning they work efficiently by collecting the coolest air, heating it up and expelling it at a speed of 300cfm on maximum setting.

Thermostatically controlled with a temperature range of 6-38 Degrees Celsius (42 – 100 Degrees Fahrenheit).

Includes push button piezo ignition for easy lighting.

The flexible sensor can be placed up to 61cm away from the heater, allowing you to position it in the most temperature critical part of the greenhouse, or it can be left on the side of heater.

There are three steps to how the thermostat will perform:

• When the sensor recognises that the temperature in the greenhouse is been reached it will burn on pilot jet only.
• If the temperature falls to the thermostat setting the main burner will burn on minimum giving approx. 50% full output, maintaining the selected temperature.
• If the temperature falls below the thermostat setting the main burner will burn on maximum giving full output to raise the temperature.

Position the heater a minimum of 15cm from the glass or wall of your greenhouse or any combustible materials.

Heater size approx. 36cm x 53cm x 18cm.

Suitable to heat a greenhouse up to 305cm (10′) x 366cm (12′).